Peugeot Boxer Van Racking Kits

Filter by Van Model (Year) and Van Size to find kit options to suit your specific van.

Which van have you got?

Pick your size to see only the kits that fit it.

Make
Generation
Van Size

Can't see your van?

Peugeot Boxer racking — sizes & the kit that fits

Load length, offside and nearside fit, and roof height for the Peugeot Boxer, with the StowPro kit built for each body.

Peugeot Boxer (2006 on) load dimensions & the kit that fits

Body Also searched as Load length Load height Offside run Nearside run
L1 SWB 2,670 mm H1 1,662 – H3 2,172 mm 2,250 mm 1,250 mm
L2 MWB 3,120 mm H1 1,662 – H3 2,172 mm 2,500 mm 1,250 mm
L3 LWB 3,705 mm H1 1,662 – H3 2,172 mm 3,250 mm 1,250 mm
L4 Maxi 4,070 mm H1 1,662 – H3 2,172 mm On request On request

Load width 1,870 mm · between wheel arches 1,422 mm · roof heights H1 1,662 / H2 1,932 / H3 2,172 mm · side door aperture 1,075 mm (L1) / 1,250 mm (nearside).

Shop Peugeot Boxer racking →

Offside or nearside?

Bird's-eye view of a right-hand-drive panel van: the offside (driver's side) takes one clear racking run from bulkhead to rear doors; the nearside (passenger side) racking is split by the sliding door.
Offside — one clear run Nearside — split by the sliding door

Bird's-eye view of a typical UK right-hand-drive van, with the standard single nearside sliding door.

Offside · driver's side

The longer run

The offside normally has no door breaking it up, so it takes the longest continuous racking run — the best wall for long items and full-height units.

Choose: Offside Only

Nearside · passenger side

Around the side door

The sliding load door splits this wall, so the nearside kit is modular fore and aft of the aperture, keeping loading access clear.

Choose: Nearside Only

Racking both walls? The Full Kit covers offside and nearside together.

Peugeot Boxer floor dimensions from manufacturer/reference data. Offside and nearside run widths are taken from StowPro product listings.

Peugeot Boxer racking — common questions

What length racking fits in a Peugeot Boxer L1 on the offside?

On a Peugeot Boxer L1 the offside gives the longest single racking run, along a load length of 2,670 mm.

The StowPro Offside kit runs 2,250 mm of shelving before the rear doors — the driver's-side wall is the best place for your longest run. For this side only choose the Offside Only kit; for both walls choose the Full Kit.

How long is the load area in a Peugeot Boxer?

The Peugeot Boxer load length is 2,670 mm on the L1, 3,120 mm on the L2, 3,705 mm on the L3 and 4,070 mm on the L4, measured along the floor.

Load width is 1,870 mm, narrowing to 1,422 mm between the wheel arches. StowPro build a kit for each of these bodies, so you match the rack to your exact van.

Do I need the nearside or offside racking kit for my Peugeot Boxer?

Choose the Offside (driver's side) kit for the longest uninterrupted run, the Nearside (passenger side) kit to rack around the sliding door, or the Full Kit to fit out both walls.

On the Peugeot Boxer the standard sliding load door is on the nearside, so that side is split into shorter modules while the offside takes the longer run. Most trades kitting out a whole van take the Full Kit.

Is Peugeot Boxer racking the same as Fiat Ducato racking?

Yes — the Peugeot Boxer, Fiat Ducato, Citroën Relay and Vauxhall Movano are the same van with different badges and identical load dimensions, so StowPro racking built for one fits the others.

Match the body length and roof height and the kit is interchangeable across the badge-engineered twins.

How much headroom is there for tall racking in a Peugeot Boxer?

The Peugeot Boxer offers H1 1,662 / H2 1,932 / H3 2,172 mm of internal load height depending on the roof, so taller units and vertical storage fit on the higher-roof bodies.

Check your roof code (H1/H2/H3) before choosing full-height shelving — the standard roof takes less than the high or super-high.

Will fitting racking reduce my Peugeot Boxer payload?

Racking uses some of the Peugeot Boxer's payload, but StowPro units are built from lightweight load-rated steel to keep that to a minimum.

Fit only the side(s) you need (Offside, Nearside or Full Kit) and keep heavy stock low and central to protect your remaining payload and handling.

What's the longest item I can carry down the side of a Peugeot Boxer?

Long items travel at floor level in a Peugeot Boxer: the 4,070 mm load length on the largest body is measured along the floor, and StowPro racking sits against the wall so the load floor in front of it stays clear.

Don't plan on carrying a full-length item on top of the racking — higher up the bulkhead and cab seats intrude, so the usable length above the floor is shorter than the floor figure. The offside kit itself runs 3,250 mm along the wall; tell us your body and roof and we'll confirm what fits.

Van Racking for the Peugeot Boxer

The Boxer's tall, flat-sided load bay is about as racking-friendly as vans get, and we make the most of it: kits from L2 right up to L4 and L5, standard through high roof.

Go shelving and you get steel shelves rated to 40kg apiece with top trays, the whole load carried in sight. Go workshop and one side becomes a drawer bank, so the screws, fixings and hand tools stay sorted while the shelves opposite do the heavy lifting. Every fitting you don't have to search for is time back, and time back is the whole business case for racking a van.

Build quality doesn't vary across the range: heavy duty, hard-wearing steel, manufactured for the toughest demands and designed to take a beating, sturdy fabricated end frames, all made and assembled at our workshop in Devon with a 3 year guarantee.

Your kit is delivered palletised with the units already built. Position them, fix them to the floor and sides of the van using the supplied brackets and fixings, and follow the comprehensive installation guide, with our team a phone call away if you want them.

Boxer, Citroen Relay and Fiat Ducato are one van underneath, and many kits stretch to the Sprinter, Master, Movano and NV400 too. The fitment list on each kit has the exact years and sizes. Add mats, bins and end frame accessories, or spec something different with build your own.